Home |  Active Topics |  Members |  Search Forums |  FAQ     
 All Forums      Mechanical     Need help with micro controller
 Printer Friendly  New Topic     Reply to Topic
Author Previous Topic Topic Next Topic  

Starting Member

1 Posts

Posted - 04 Oct 2012 :  13:17:48  Show Profile  Visit maitkaa's Homepage  Reply with Quote

I need some help with micro controller module.I would like do know how to make a program that will write on screen if i connect 1 adc so it will show on screen that there is a connection .
Here is the site of what i am using : http://home.roboticlab.eu/en/hardware/homelab/controller/atmega128?s=translation_true

i must find out how to make digital or analog connections or something like that

  Previous Topic Topic Next Topic  
 Printer Friendly  New Topic     Reply to Topic
This page was generated in 0.39 seconds. Snitz Forums 2000