Topic

Home

Links

Events

Engineering supplies
Links to sites related to engineering and mechanical supplies

Motion Co
Posted by mike23 on Sunday, June 21, 2009 (GST)

Drive systems. Belts, bearings, shafts, spockets, chains, pulleys, gears, worms and wheels.
Prices seem reasonable too.
Handy online calculator for working out centre distances on timing belts and pulleys.

http://airlink-compressors.co.uk
Posted by airlink on Tuesday, May 22, 2007 (GST)

airlink-compressors.co.uk aim to supply all of your compressed air and pneumatic fittings needs with very competative prices. Please visit the site and all comments are very welcome. Thank you.

Marchant Dice Ltd
Posted by Marchantdice on Sunday, February 12, 2006 (GST)

A "CNC Sweet Shop" stocking, converting or manufacturing all the components to build a CNC.
eBay shop http://stores.ebay.co.uk/Marchant-Dice-Ltd

Roll pin data
Posted by Bob on Wednesday, July 20, 2005 (GST)

Data of minimum and maximum sizes of holes for fitting roll pins (imperial sizes) also strength data on pins.

Folkestone Engineering Supplies
Posted by Agog on Sunday, January 30, 2005 (GST)

Welcome and thank you for visiting our web site. Within it is listed our catalogue, including prices, on a wide range of metal, fasteners and taps/dies ...

Search ...

Go

New Events

UK MICROMOUSE 2010

Birmingham City University have announced that they are pleased to host UK Micromouse 2010 - their 7th consecutive year.

UK MICROMOUSE 2010

Birmingham City University have announced that they are pleased to host UK Micromouse 2010 - their 7th consecutive year.

Four times a year, San Diego, California students showcase their electronic and robotics projects.

Latest posts on RobotBuilder
RobotBuilder

Fire-Bot (by: roboticsystem)

Last Post by: roboticsystem on 10 Sep 2010 @ 09:33:31

Contest for humanoid robots outer cover design! (by: PAL Robotics)

Last Post by: PAL Robotics on 04 Sep 2010 @ 21:28:27

Robotic Project Advice (by: mike23)

Last Post by: mike23 on 04 Sep 2010 @ 15:46:31

Confused on how to wire up my robot. (by: mike23)

Last Post by: mike23 on 31 Aug 2010 @ 10:59:05

well, technically it IS a robot.. (by: stan)

Last Post by: stan on 24 Aug 2010 @ 18:05:25

Last Refreshed 9/10/2010 9:38:33 PM

robots.net
Recent robots.net articles

Robots: Programmable Matter

The latest episode of the Robots Podcast looks at the following scenario: Imagine being able to throw a hand-full of smart matter in a tank full of liquid and then pulling out a ready-to-use wrench once the matter has assembled. This is the vision of this episode's guests Michael Tolley and Jonas Neubert from the Computational Synthesis Laboratory run by Hod Lipson at Cornell University, NY. Tolley and Neubert give an introduction into Programmable Matter and then present their research on stochastic assembly of matter in fluid, including both simulation (see video above) and real-world implementation. Read on or tune in!

Modelers Make Gundam from Runners

You know those little plastic tree-like structures left over when you're done building a model? They're called runners - part of the injection molding process and basically a waste. For most products, the factory recycles runners as the parts are detached, but for models they are left on to make live easier for the builder. Well, some folks over at ummmm....a place in Japan, took a boat-load of these runners and made a 3-meter tall Gundam. Check it out! And the video.

Transformers 3 Filming Accident

During filming for the Transformers 3 movie, a stunt went terribly wrong and an extra was injured. The accident involved several vehicles with an object going through a windshield hitting the driver resulting in a serious head injury. Filming was taking place in Hammond in northwestern Indiana. Several videos exist of the movie shooting in Chicago on Youtube, along with some funny trailers. Transformers 3 is scheduled for a July 2011 release.

Frog Sensors Shake Robot Head

With more biology than robotics, researchers at University of Tokyo harvested eggs from African Clawed Frogs to build inexpensive olfactory sensors. DNA from fruit flies and moths were added to stimulate production of the sensors known to be good at detecting certain molecules, then electrodes were attached to capture the receptor's output. Now for the "Robot" part - results from the sensors are read by software on a PC and a simple actuator was used to cause a robotic mannequin head to shake back and forth adding impact to the experiment. See the PDF for the full scoop.

RoboCup Returns Golfer's Balls

The term RoboCup usually makes us think of a contest involving robots and soccer, but this one is different. The RoboCup Golf Ball Returner from Fine Tune Golf does just what it says, and fairly well too. RoboCup captures your put (even the bad ones using the Caddy Cord) and sends it back for another shot - over 12,000 times on AA batteries, and around 14 feet. Check out the Video.

Last Refreshed 9/10/2010 9:38:34 PM

KurzweilAI » News
Accelerating Intelligence

Remote Control of Brain Activity Using Ultrasound

Mental maturity scan tracks brain development

‘Here you have’ e-mail worm spreads quickly

Clues to Human Thought Found in Worm’s Brain

CMU researchers develop method to help computer vision systems decipher outdoor scenes

Last Refreshed 9/10/2010 9:38:39 PM

Last Refreshed 9/10/2010 9:38:40 PM